Tips To Clean Your Bathroom With Steam Cleaners

January 13th, 2012 by admin Leave a reply »

Keeping a bathroom free from grime, water stains, and mildew can be an overwhelming task if using various brushes, mops, sponges, and chemical cleaning solutions. Simplify the process with steam cleaners that convert to a hand held steamer. These units can be used on every hard surface in a bathroom, including the floor, tile walls, shower doors, bathtubs, toilets, countertops, sinks and faucets.

Follow Guidelines To Ensure Best Results

All steam cleaners come with step-by-step instructions and warnings. Reading the directions will make sure that the machine functions properly without much effort. Every unit works slightly differently, but most only require water to be poured into the tank in order to disinfect a dingy bathroom. After the unit heats up, vapors produce high pressure that will tackle even the deepest ground-in problems. A few models demand that the vapors be released for a few seconds through a spout or nozzle prior to operating to prevent air bubbles.

It’s vital to remember that the vapors emitted from steam cleaners are incredibly hot. Therefore, safety should come first by keeping the nozzle pointed away from yourself and others to avoid burns. Also, children and pets should be kept away from the area that’s being disinfected so that they don’t come into contact with the extreme heat.

Steam Cleaners Tackle Tough Stains

Stains that have been left for a long period of time can be very difficult to remove. Thankfully, many of these products include special solutions to be used specifically on set-in stains. Normally, these solutions have to be added to water and then poured into the reservoir on the unit. If plain vapor doesn’t break through the stain, try a little vinegar or baking soda. These household items can be effective cleaners for tough stains. Dilute vinegar with an equal amount of water to spray or dab onto the tile. Then use a stiff brush to breakdown the particles of the stain, scrubbing in small circles instead of back and forth to eliminate even more debris from the tile or grout. The other option is to use baking soda to create a paste to apply to the soiled area. After either method, be sure to rinse generously and then soak up extra moisture with a cloth, mop, or paper towels.

Use The Right Attachment With A Hand Held Steamer

The various attachments that are included transform steam cleaners into a hand held steamer, which assists in effective cleaning. Many machines incorporate different accessories in several shapes and sizes in their packages. Some contain cloth coverings to catch the dirt as it drips down the tile of a shower wall. For grout lines or small tiles, shooting vapors directly onto grime without a cloth covering will get the job done quicker. Larger attachment heads with cloth coverings work well for bigger tiles or bathtubs.

While some homeowners worry about steam cleaners causing tiles to crack, they can rest easy. Even though these machines do emit high pressure, it isn’t possible to crack through the protective surface of a tile. For painted tiles, however, be sure to operate steam cleaners on the lowest heat setting so the hot vapors don’t remove the paint or cause damage. Also, leaving the attachment of a hand held steamer on one section for too long can harm the painted surface. These machines can be operated as much as desired to make bathroom cleaning a breeze.

Additional Tips

When operating a hand held steamer covered with a cloth, hold the attachment against the tile and drag it slowly along the surface. As the cloth gets dirtier, the tile will start to look cleaner and shiny. Keep a small towel handy when using direct vapor on grout or smaller tiles to remove dirt and moisture that can form and stream down the freshly cleaned surface.

Starting on one section at a time and continuing either across or down the surface will make sanitizing bathrooms easy. If the unit contains a trigger or button to release the vapors, use it often to avoid wasting time or dispersing hot water when not ready.

Be sure to pour enough water into the tank to produce the right amount of steam for an entire bathroom so you don’t have to constantly refill the unit. Once the tank is empty, follow the manual’s directions for waiting the right amount of time before adding more water. This allows the tank to cool down and prevents burning of the skin.


Comments are closed.